Millcreek Model 57P Rear Discharge Manure Muck Dung Spreader PTO Driven

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Millcreek Model 57P Rear Discharge Manure Muck Dung Spreader PTO Driven

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

 

With just over 2 cubic yards of capacity, the Model 57P is our smallest PTO driven spreader, and has been in production since 2004. It only requires a 20hp tractor to operate (less in some cases) and is popular with market gardeners, equine establishments, smallholders and farms that require a smaller traditional rear discharge spreader. Many customers use their Millcreek machines for spreading compost, green waste, woodchip, grass clippings, sand/rubber mixes, as well as the full range of manures. For other rear discharge models, both PTO and ground driven, please visit our website at www.millcreek.co.uk

 

 

Highlights1.58m3 (2.06 cubic yards, 1,580 Litres) capacity, that’s typically around 1.25 tons of wet well rotted manure.Traditional rear discharge design for an even consistent spread, stable handling (low centre of gravity), and machine longevity.Minimum 20hp tractor recommended.3,330.00 + VAT, that’s 3,996.00 including VAT. Delivery to most UK mainland locations (except highlands) for 100 incl. VAT. For other locations please ask8 other models also available (from 0.5 to 3 ton), both ground and PTO drive. Please visit www.millcreek.co.uk

 

 

TypePTO driven, single horizontal beater (optional upper beater available), rear discharge

 

 

Rated Capacity (ASAE S324.1 standard method)1.58m3 (2.06 cubic yards, 1,580 litres, 56 cubic feet)

 

 

Body DimensionsLength = 2.28m (7’6″)Width = 0.94m (3’1″) + ‘body flare’Height = 0.44m (1’5″)

 

 

Overall dimensionsLength = 3.50m (11’6″)Width = 1.57m (5’2″)Height = 0.86m (2’10”)

 

 

Wheels, Tyres & Track7.6″ x 15″ Ribbed pattern tyres on 4 bolt steel wheels1.33m (4’4″) track width (centreline tyre to centreline tyre)

 

 

Unladen weight (standard spec)Approx 340Kg (750lbs)

 

 

ConstructionAll steel MIG welded bodyOven baked powder coat finish20mm high density re-cycled plastic non-rotting floor9mm T-rod apron chainsPTO gearbox and #RC50 roller chain for apron and beater driveSealed bearingsFolding jack stand as standard

 

 

Options availableUpper beaterEndgate
Ring eye coupling (for ‘pick-up hitch tractors, in lieu of standard ‘drop-pin’ clevis hitch)Fines Pan

 

 

Please note: Tractors and options shown in some photos are not included in the price, but are shown for reference purposes only. Additional photos, videos and other models can be viewed at our website at www.millcreek.co.uk

 

 

Millcreek manure spreaders are manufactured in the USA. Our range consists of nine different models, both ground and PTO drive from 0.5 to 3.0 ton capacities. At Meadow Machinery here in the UK, we have been the sole appointed distributor of Millcreek products since 2003. We are a small family business, flexible to our customers needs with a focus on quality products and after sales service. All Millcreek spreaders are parts warranted for 2 years and are CE marked. We accept payment by bank transfer or cleared cheque.

 

 

To order a Millcreek spreader, or for further information, please call us on 01652 679000, email us at info@millcreek.co.uk, or contact us via ebay.

 

 

Thank you.

 

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Business, Office and Industrial:Agriculture/Farming:Farm Implements and Equipment
Location: Market Rasen